Valve & Vent

Specifications

Why Radiator Valves?

  • Aesthetics: Valves instead of exposed pipe provide a finished look.
  • Convenience: Valves may be used to isolate the radiator without having to shut down the entire system for room painting, etc.
  • Function: Valves may be used to balance or control the temperature of individual radiators.

 

Which Valves Are Right for Your Application?

  • Straight or Angle: If the piping is coming from the floor or from a side wall use straight valves; if the piping is coming out the same wall that the radiator is on, use angle valves.
  • Shut-off Valves: If you desire the convenience and aesthetics of radiator valves, but do not need to control the radiator, choose a pair of shut-off valves.
  • Thermostatic Valves: If you desire to control the temperature of the radiator choose a thermostatic control valve for the supply side and a matching shut-off valve for the return side. The thermostatic control valves offer a range of temperature settings. They will maintain the room at a temperature you have selected by automatically adjusting the heat output from the radiator.

Accessory Valves (PDF)

 

Specifications

Decorative Valves are available in a polished chrome finish in both straight and angle configurations. All valves are ½” NPT size (male threaded union X female threaded connection). Valves are used in pairs: either two shut-offs or a shut-off and a thermostatic radiator valve (TRV).

Shut-Off Valves Thermostatic Radiator Valves

Standard Valves are available in a nickel plated finish in straight, angle, and reverse angle pattern configurations. All valves are ½” NPT size (male threaded union X female threaded connection). Valves are used in pairs: either two shut-offs or a shut-off and a control valve with white thermostatic sensor.

Shut-Off Valves
Thermostatic Radiator Valves

The Pipe Cover Shut-Off Valve is a chrome plated shut-off/union ball valve, suitable for exposed installation, or installation inside Runtal’s vertical trim covers (PC-3 and PC-10). The valve is available in ½” NPT male thread X ½” sweat connection. Valves are used in pairs.

Shut-off Valve Sets

Decorative Straight

Model: DEC-ST SET
Finishes: Brushed Nickel, Chrome

 

Decorative Angle

Model: DEC-ANG SET
Finishes: Brushed Nickel, Chrome

 

Standard Straight

Model: VALVE-ST SET

 

Standard Angle

Model: VALVE-ANG SET

 

Pipe Cover Straight

Model: VALVE-PC SET

Thermostatic Control Valve Sets

Decorative Straight

Model: DEC-ST/TRV SET
Finishes: Brushed Nickel, Chrome

 

Decorative Angle

Model: DEC-ANG/TRV SET
Finishes: Brushed Nickel, Chrome

 

Standard Straight

Model: CONTROL-ST SET

 

Standard Angle

Model: CONTROL-ANG SET

 

Standard Reverse Angle

Model: CONTROL-REV SET

Escutcheon & Nipple Sets

Available in brushed nickel or chrome finish

Escutcheons & Nipples

Model: BN ESCUT/NIPPLE SET

 

Nipples

Model: CHR NIPPLE SET